Compost Calculator: Balance browns and greens by volume and see how much to add for a target compost ratio
Compost Calculator is the tool for one job: balance browns and greens by volume and see how much to add for a target compost ratio. This guide covers the inputs to gather, one pass you can check, and the point where the result stops being enough.
What to bring to the Compost Calculator
A common target is about 30 parts carbon (browns) to 1 part nitrogen (greens) by weight, though gardeners often mix by volume. The page tells you which side you are heavy on.
Compost Calculator runs in your browser. The file or the figures stay on your device.
A worked pass with the Compost Calculator
If the mix is too heavy on browns, add greens. If it is too heavy on greens, add browns. The amount to add is the gap between your ratio and the target.
Do that pass with a case you already understand. Then replace it with the real case. Changing one input at a time is how you see which field actually moved the result.
How to check the result
Adding the amount the page suggests should move the ratio onto the target when you calculate it again.
Where the Compost Calculator stops
Wet scraps and dry leaves do not have the same density. Volume ratios are a guide. Smell and heat tell you how the pile is actually doing.
If your decision depends on a rule this page does not mention, a lender, a clinic, a teacher, a client, or the vendor of the file, use their rule. Keep this result as the draft you compare against that rule.
Questions
What does the Compost Calculator do?
It is there to balance browns and greens by volume and see how much to add for a target compost ratio. The form on the Compost Calculator page is the place you do that.
How do I know the Compost Calculator result is usable?
Adding the amount the page suggests should move the ratio onto the target when you calculate it again.
What should I not trust the Compost Calculator to decide?
Wet scraps and dry leaves do not have the same density. Volume ratios are a guide. Smell and heat tell you how the pile is actually doing.
When the next step is a different tool
- CFM Calculator — Calculate airflow CFM from room volume and air changes per hour for a fan, hood, or workshop.
- kW to kVA Calculator — Convert kilowatts to kVA with power factor, and estimate single-phase or three-phase amps.
- Aquarium Calculator — Convert tank dimensions to gallons and liters, plus heater watts, water-change volume, and salt dose.