Lumber Calculator: Calculate board feet, linear feet, and lumber cost from thickness, width, length, and board count
Lumber Calculator is the tool for one job: calculate board feet, linear feet, and lumber cost from thickness, width, length, and board count. This guide covers the inputs to gather, one pass you can check, and the point where the result stops being enough.
What to bring to the Lumber Calculator
Board feet are thickness in inches times width in inches times length in feet, divided by 12, times the number of boards.
Lumber Calculator runs in your browser. The file or the figures stay on your device.
A worked pass with the Lumber Calculator
A 2×4 that is 8 feet long is 2 × 4 × 8 / 12 = 5.33 board feet. Ten of them are 53.3 board feet. The price is that volume times the price per board foot.
Do that pass with a case you already understand. Then replace it with the real case. Changing one input at a time is how you see which field actually moved the result.
How to check the result
A 2×4 is the nominal size. If you are buying surfaced lumber, the actual thickness is less, but board feet are still sold on the nominal size unless the yard says otherwise.
Where the Lumber Calculator stops
It does not add waste for cuts. Add waste yourself before you order.
If your decision depends on a rule this page does not mention, a lender, a clinic, a teacher, a client, or the vendor of the file, use their rule. Keep this result as the draft you compare against that rule.
Questions
What does the Lumber Calculator do?
It is there to calculate board feet, linear feet, and lumber cost from thickness, width, length, and board count. The form on the Lumber Calculator page is the place you do that.
How do I know the Lumber Calculator result is usable?
A 2×4 is the nominal size. If you are buying surfaced lumber, the actual thickness is less, but board feet are still sold on the nominal size unless the yard says otherwise.
What should I not trust the Lumber Calculator to decide?
It does not add waste for cuts. Add waste yourself before you order.
When the next step is a different tool
- CFM Calculator — Calculate airflow CFM from room volume and air changes per hour for a fan, hood, or workshop.
- kW to kVA Calculator — Convert kilowatts to kVA with power factor, and estimate single-phase or three-phase amps.
- Aquarium Calculator — Convert tank dimensions to gallons and liters, plus heater watts, water-change volume, and salt dose.