Mytulify logoMytulify

Wire Size Calculator: Pick a wire gauge from load amps, run length, voltage, and a maximum voltage-drop percent

Mytulify TeamUpdated October 23, 20263 min read
Wire Size Calculator: Pick a wire gauge from load amps, run length, voltage, and a maximum voltage-drop percent

Wire Size Calculator is the tool for one job: pick a wire gauge from load amps, run length, voltage, and a maximum voltage-drop percent. This guide covers the inputs to gather, one pass you can check, and the point where the result stops being enough.

What to bring to the Wire Size Calculator

Enter amps, one-way or round-trip distance as the form defines it, voltage, and the percent drop you will accept. The page picks the smallest gauge that stays inside that drop.

Wire Size Calculator runs in your browser. The file or the figures stay on your device.

A worked pass with the Wire Size Calculator

A longer run or a higher load steps you to a thicker wire. Read the AWG it names and the percent drop that gauge actually produces, not only the gauge.

Do that pass with a case you already understand. Then replace it with the real case. Changing one input at a time is how you see which field actually moved the result.

How to check the result

Tighten the allowed drop from 5% to 3%. The gauge should stay or get thicker, never thinner.

Where the Wire Size Calculator stops

Local electrical code and the breaker size can require a thicker wire than voltage drop alone. This page does not replace that.

If your decision depends on a rule this page does not mention, a lender, a clinic, a teacher, a client, or the vendor of the file, use their rule. Keep this result as the draft you compare against that rule.

Questions

What does the Wire Size Calculator do?

It is there to pick a wire gauge from load amps, run length, voltage, and a maximum voltage-drop percent. The form on the Wire Size Calculator page is the place you do that.

How do I know the Wire Size Calculator result is usable?

Tighten the allowed drop from 5% to 3%. The gauge should stay or get thicker, never thinner.

What should I not trust the Wire Size Calculator to decide?

Local electrical code and the breaker size can require a thicker wire than voltage drop alone. This page does not replace that.

When the next step is a different tool

  • CFM Calculator — Calculate airflow CFM from room volume and air changes per hour for a fan, hood, or workshop.
  • kW to kVA Calculator — Convert kilowatts to kVA with power factor, and estimate single-phase or three-phase amps.
  • Aquarium Calculator — Convert tank dimensions to gallons and liters, plus heater watts, water-change volume, and salt dose.

Related tools

← All blog posts